Ασύρματος τηλεχειριζόμενος διακόπτης με 12 ρελέ 12CH DC 12V 10A - OEM S899

This kind of wireless intellect receiving control main apply to auto door, curtain, lifting appliance, gate way, lifter, industrial control and security field.

This kind of wireless receiving control is high confidentiality, large memory space, stable characteristics, low power consume and very convenience, it is unnecessary adopt the traditional wire jumper or dip switch code but only receive and store the wireless signal from the remote control, and The lost learnt control can not work if you delete the memory message of the receiving control, however, it should learning again by the owner if want to obtain the right of use.

2. The way of output

A. 1-12CH Momentary-----Press Transmitter Button “1”to learn

B. 1-12CH Latched----- Press Transmitter Button “2” to learn

C. 1-12CH Toggle-- -- Press Transmitter Button “3” to learn

D.1-6CH Momentary, 7-12CH Latched ------Press Transmitter Button “4” to learn

E.1-6CH Momentary, 7-12CH Toggle------ Press Transmitter Button “5” to learn

F.1-4CH Momentary, 5-12CH Latched------- Press Transmitter Button “6” to learn

G.1-4CH Momentary, 5-12CH Toggle-------- Press Transmitter Button “7” to learn

H.1-4CH Toggle, 5-12CH Latched----------- Press Transmitter Button “8” to learn

Momentary------------Press the Transmitter button 1, the receiver relay 1th is ON, release button 1; the receiver relay 1th is OFF, the same as 2/3/4/5/6/7/8/9/10/11/12. 12CH are independent.

Toggle---------------Press transmitter button 1 for 1 time, the receiver relay 1th is ON, press button 1 again, the receiver relay 1th is OFF, the same 2/3/4/5/6/7/8/9/10/11/12. 12CH are independent.

Latched------------------

Press transmitter button 1, the receiver relay 1th is ON, the relay 2/3/4/5/6/7/8/9/10/11/12 OFF.

Press transmitter button 2, the receiver relay 2th is ON, the relay 1/3/4/5/6/7/8/9/10/11/12 is OFF.

Press transmitter button 3, the receiver relay 3th is ON, the relay 1/2/4/5/6/7/8/9/10/11/12 is OFF

Press transmitter button 4, the receiver relay 4th is ON, the relay 1/2/3/5/6/7/8/9/10/11/12 is OFF.

It also mean .Latched only can keep 1CH ON .and it will often have 1CH is ON.

3. Learning way and steps

1. Press the learning Button of the receiver and buzzer keep tweeting, indicate enter into the status of learning 

2. Press the Relative button of the transmitter to learn Relative output way, indicate learning success as the buzzer tweet “Be Be Be” 3 sounds ,and then you press the transmitter Button you can hear the relay act sound. The receiver automatically exits learning state if you do nothing in 32 seconds.

4. Delete memory message (Must clear the code before you learn different button )

Keep pressing the learning Button of the receiver, the buzzer buzzer tweet and “Be Be Be Be  “ (please do not wait for it Be for 6 sounds) then release the button , indicate success to delete the memory message.


5. Main Technique Data

Working voltage

DC12V

Static working current

7A 125VAC / 20A 14VDC / 5A 250VAC ( less than it is ok )

Working temperature

-40'C- +80'C

Receiving sensitive

≥-105dBm

Working frequency

315MHz/433MHz (optional)

Relay capacity

7A 125VAC / 20A 14VDC / 5A 250VAC

Receive the type of encoding

Learning code

Maximum storage for transmitter

30pcs of learning or fixed code;

Size

100mm*75mm*27.5mm

Output  State

8 Kinds Output state adjusted by learning different button of the transmitte


Ασύρματος τηλεχειριζόμενος διακόπτης με 12 ρελέ 12CH DC 12V 10A - OEM S899

  • Κατασκευαστής: OEM
  • Κωδικός Προϊόντος: 0128
  • Διαθεσιμότητα: Διαθέσιμο
  • 44,50€

Δωρεάν Αποστολή

Όλες οι παραγγελίες άνω των 20 ευρώ με τραπεζική κατάθεση αποστέλλονται δωρεάν!

Δωρεάν Service

Μετά τη λήξη της εγγύησης σε όλα τα προϊόντα προσφέρουμε δωρεάν service!

Εγγύηση Τιμής & Άμεσης Αποστολής

Προσφέρουμε εγγύηση χαμηλότερης τιμής και άμεσης αποστολής σε 24 ώρες!

Ετικέτες: 12 VOLT