Ασύρματος διακόπτης με ένα κουμπί στο τηλεχειριστήριο και με ένα ρελέ κατάλληλο για λειτουργίες γκαραζόπορτες, ασύρματα σύστημα τηλεχειρισμού, λάμπες κ.λ.π εύκολο στην εγκατάσταση και εύκολο στη χρήση, ασφαλές και αξιόπιστο.

Working Voltage: DC4V-12V   

(DC4V 4.2V 4.5V 5V 6V 7.4V 9V 12V) All is ok

Quiescent /Standby Current: 7-9ma

Working Current: 70-130ma

Relay Standard :  20A (( 14VDC 12A  120VAC 7A)

Max Load: 10A (have better load less than 7A)

Size : 34*23*15mm

Working Frequency: 315MHZ/433.92MHZ Optional 

Learning Code: Learning Button to add Transmitter

Working Mode: Momentary Toggle Latched adjusted by Jumper

Momentary----- Press and Hold---ON, Release----OFF

Toggle-------Press one time ----ON. Press it again ----OFF

Latched--------Press A ----ON, Press B-----OFF

GND-------------------Input GND –

VCC-------------------Input VCC +

NC---------------------Normally Close

COM------------------Common

NO---------------------Normally Open

Clearing Code

Press the Receiver learning button and hold for about 5s until the Receiver LED indicator from ON to OFF, it means the code have been cleared

Learning Code

Momentary/Toggle Mode

Press the Receiver learning button, the Receiver LED indicator flash slowly, it means entering into learning state, press the transmitter Button, the receiver LED indicator flash fast for 2 times and then flash slowly, it means learning is successful. Press the learning button again to turn off the LED indicator, it means learning is finished.

Latched Mode

Press the Receiver learning button, the Receiver LED indicator flash slowly, it means entering into learning state, press the transmitter A Button, the receiver LED indicator flash fast for 2 times, then Press B Button, the receiver LED indicator flash fast for 2 times, and then the Receiver LED indicator turn off itself, it means learning is finished.