Ασύρματος τηλεχειριζόμενος διακόπτης στα 433MHz AC 220V. Ο δέκτης αποτελείτε από ένα ρελέ και έχει είσοδο 220 βολτ και βγάζει 220 βολτ. Ο ρελές δεν είναι ξερή επαφή. Κατάλληλο για οτιδήποτε που λειτουργεί με 220 βολτ.
Τάση εισόδου : AC 85V-250V
Ρεύμα σε αναμονής: <5MA
Συχνότητα RF: 433M
RF working mode: superheterodyne
Receive sensitivity: >97dbm
Εμβέλεια: 20-50m ( open space)
Remote storage: 25pcs
Support remote type: Learning code 1527code, Fixed code(Rolling code can be design)
Λειτουργίες: Momentary, Toggle, Latching
Διαστάσεις πλακέτας: 53.8*31.2mm.
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned;
After clearing the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time, the LED will be on , it comes into momentary setting learning state mode. Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off. It means learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , the LED will be on , it comes into toggle setting learning state mode. Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off. It means learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.
For example : button A = ON , button B = OFF
Push the learning key on the receiver triple time , the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.
A = ON , B = OFF .