Ασύρματος τηλεχειριζόμενος διακόπτης στα 433MHz AC 220V με ένα χειριστήριο και ένα δέκτη με δύο ρελέ. Ο δέκτης αποτελείτε από δύο ρελέ και έχει είσοδο 220 βολτ. Ο ρελές είναι ξερή επαφή και μπορεί να συνδεθεί οτιδήποτε που λειτουργεί με 220 βολτ, 12 βολτ ή ξηρή επαφή on off
Input Power:AC 85V-250V
Standby Current:<5MA
RF Frequency:315M or 433M
RF working mode:superheterodyne
Receive sensitivity: >97dbm
Transmitting distance: 20-50m ( open space)
Decoding mode: software decoding
Remote storage:25pcs
Support remote type: Learning code 1527code, Fixed code(Rolling code can be design)
Working mode:Momentary, Toggle, Latching
Wiring type:fixed termina
Output Terminal :NO , NC , COM
Dimension of PCB: 68*47mm.
Wiring diagram 1:
NO: Output , normal open;
COM:Output , common ;
NC: Output , normal close.
Specifications Of The Remote Control:
Operating frequency: 433.92MHz
Power by 2Pcs 3V Coin Cell Button Battery (Battery included ),
Material: PVC.
Button: 2 buttons
Size: 59mm x 28mm x 8mm;
Operating voltage: 6V ;
Operating Current: 12mA
Transmitting power: 10mw
Modulation mode: ASK (AM).
Encoding type: Learning.
Transfers distance: 80m.
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned .
After clearing the code, all the remote control can not work any more.
Learning the code :(momentary)
Press the learning key(on the Receiver) once time, the LED (on the Receiver)will blink one time. When the LED is on, press the button of the remote control(You want to let it learn), the LED (on the Receiver)will blink for 3 times and then turn off, Learning to succeed.
Learning the code : ( Toggle )
Press the learning key(on the Receiver) 2 times, the LED (on the Receiver)will blink 2 times. When the LED is on, press the button of the remote control(You want to let it learn), the LED (on the Receiver)will blink for 3 times and then turn off, Learning to succeed.
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for "ON", the second time learnt for "OFF".
For example : button A = ON , button B = OFF
Press the learning key(on the Receiver) 3 times, the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.
A = ON , B = OFF .
NOTE 1:
The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the receiver will stop working or not working properly.
NOTE 2:
The receivers in our store are mainly used together with the related products in our company. If you want to use your own transmitter, please confirm if the operating frequency, chip type and vibration resistance of your transmitter are in accordance with ours. If not, they will fail to match.
NOTE 3:
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient, (when the battery voltage is insufficient, generally get close transmitting )
3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products,and avoid too short distance between the remote control and receiver board .
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe .