Ασύρματος τηλεχειριζόμενος διακόπτης με ένα δύο κουμπιά στο τηλεχειριστήριο και με ένα 2 ρελέ στην πλακέτα κατάλληλο για λειτουργίες γκαραζόπορτες, ασύρματα σύστημα τηλεχειρισμού, λάμπες κ.λ.π εύκολο στην εγκατάσταση και εύκολο στη χρήση, ασφαλές και αξιόπιστο.
I. Main Features:
1.Two channels of output, the output can be independent, but also non locking and interlocked
2.Can switch the working mode between inching, self-locking and interlocked
3.Using wireless encoding technique, no direction, no mutual interference
4.Adopting larger capacity relay, can control electrical equipment of more than 1000W
5.Mainly applied for: Remote control of the on and off of pump, machine-tool, LED lights and other Civil and industrial supporting remote areas.
Mainly applied for: Remote control of the on and off of pump, machine-tool, socket, LED lights, doors, alarm system, motor bike, MP3 and other Civil and industrial supporting remote areas.
Operating Voltage: 6V
Operating Frequency: 433MHZ
Vibration Resistance: 126
Chip Type: 2260
Modulation: ASK (Stable, less interference)
Encode Type: Pads
Battery Type: 2pcs 3v 2016 button cells(not included)
Remote Distance: 20m (Theoretical value)
Ambient Temperature: -30 oC -70oC, Humidity<95%
Product Dimension: 55x30x11mm
Input Voltage: DC 12V
Operating Frequency: 433MHZ
Operation Way: Inching, Self-locking, Interlocked
Coding Way: Intelligent Learning
Output Type: Passive Output
Maximum load: 10A
Ambient Temperature: -20 oC -65oC, Humidity<95%
Factory Default: Self-locking
Board Dimension: 69x49x17mm
Case Dimension: 75x65x29mm
IV.Operation Way and Steps:
Inching mode: The output relay remains on as long as the transmitter button is depressed.
Self-Locking mode: Press the button one time, the relay turns on; Press again, turns off.
Interlocked mode: Press one button one time, the relay turns on; Press another button, turns off.
Programming the control:
To change the mode, press and hold the button on the receiver. After one second, the red light will turn on and stay on for about 5 seconds. Then the red light will begin to flash. It will flash once, then twice, and finally three times.
For interlocked mode, release the button after the light flashes once.
For Self-Lock mode, release the button after the light flashes twice.
For Inching mode, release the button after the light flashes three times.
How to Link
Whenever the receiver mode is changed, the transmitter must be learned by (linked to) the receiver. First, clearn the memorized code by pressing the button on the receiver for about 5 second until the LED light off. Then press the button until the red light on the receiver turns on. At that point release the button on the receiver. The red light will stay on. When you press a transmitter button, the red light will flash two long times and then rapidly flash. At this point, the transmitter and receiver are linked. When the button is released and pressed again, the associated relay on the receiver will turn on.