Τηλεχειριζόμενος διακόπτης GSM λειτουργεί με κάρτα sim και μέσο εφαρμογής στο κινητό ή στέλνοντας SMS στην συσκευή. Μπορείτε να ανοιγοκλείσετε τις πρίζες, να βλέπετε της θερμοκρασία του χώρου ή και ακόμη να διαχειριστείτε της πρίζες σαν θερμοστάτης controler ON OFF με τον αισθητήρα θερμοκρασίας που διαθέτη. Η οδηγίες χρήσεις είναι στα αγγλικά.
Rated current: 10A
Rated voltage: 110V-245V
Rated frequency: 50HZ-60HZ
Frequency bands :850/900/1800/1900MHz
Rated Power: 2200W
Using the temperature range: -10C-55C
Voltage range: 110V-245V AC
1 x GSM Switch SC3-GSMT (EU/UK/US/CN plug) Please note the plug you need.
1 x Antenna
1 x Cable
1 x User manual
1.the package no including the sim card !
2.when you order ,please let us know what plug you need,thanks!
The power card plug in interface
Insert SIM Card:! Installed your SIM card before power on, non-installed SIM card after power on A short initialization time (30 seconds) after power on, related operations after initialization GSM switch is disconnected by default..
Turn on the juice Waiting for SIM card to connect the GSM network (according to local operators and signal level, usually about 1 minute to get into the network), and observe the SIG lights on the panel (the start is 1 second flash), when flash becomes 4 seconds, the proof has entered the GSM network, Then you can set and control the associated operation.
Set Password: Must set up the user password first, GSM switch initial password is:. 000000 Set Password contents 0-9Arabic numberals (Not letters or symbols, otherwise it will prompt an error), Set Password contents format: "SN + six old . password + NEW + six new password "For example, customers want set their passwords to:" 123456 ", then he should edit the message content:" SN0000NEW123456 "issued to GSM switch, if you set successfully, you will receive the message: "NEW SN SETOK NEW SN IS 123456 (New password). The password with the power-down
Set master number can set up 10 groups, There are two ways to set the master number: one is through SMS, The other one is through the Set button Such as the user's password is 123456, trying to set 13788889999 to master number, and. then edit the message content: "SN123456SET13788889999" issued to GSM switch, if successfully, you will receive a message: "13788889999SETOK" Only the master number can control the outlet by dialing, when the master number dial number of GSM swithch, the switch. status will change, and then hang up automatically after one second, does not produce any cost. Master numbers with a power-down memory function.
Socket control: SMS / Dail / Button
When you insert the card slowly! It should slip into the slot smoothly, if not, do not come hard.
SIM card requirements: Global GSM standard SIM card can be used, currently does not support 3G or CDMA card, please activate the new SIM before insert the device.
Do not place the GSM switch in the tin trunk or metal enclosed environment, this will cause the signal unable access GSM network or worse, affect the actual use.
Incoming Caller ID display must be turned on, make sure that SIM card has sufficient balance in order to call and send text messages.
When the signal is weak in some environment, it will make SMS controlled no that ideal, and this is normal. Because the message communication needs transit point forward, it will send to the other number on time when in a good signal. In such circumstances , if you want to set the master number, consider to use SET button to set master number will be more efficient.
To save time, once the dial socket after the success of GSM call will automatically hang up the number of the owner, the user may hear "Your call can not be answered, please hang up, beeps, etc." Is a normal tone.
SMS or phone in the control, not to operate the buttons at the same time, this will cause system instability.
Using the product should pay attention to moisture, limited to indoor use. Power do not work more than 2200W, inductive load power by half. Rated voltage is 110V-220V, please use in a safe environment, to ensure safety.
This product can only control the power supply switched on or off, do not have other functions. For some electrical appliances, such as some air-conditioning to maintain the function is not powered off, re-connect the power, will not immediately work. For the state to maintain electrical power, such as most of the TV, stereo can immediately work.